Building setbacks, fence regulations, and zoning requirements for Beaufort County.
Search Your Property FreeSetback requirements determine how far structures must be from property lines. The minimums below come from the Beaufort County code for homes in unincorporated areas; your parcel's zoning district can change them.
Beaufort County uses a form-based code with transect zones; figures are for the T3 Edge (T3E) zone. Corner side 15 ft; ancillary buildings 5 ft from side lines. T2 Rural Neighborhood: 35 ft front, 12 ft side, 50 ft rear. T2 Rural: 50 ft front, 18 ft side, 50 ft rear. A building may align with a neighbor set closer to the street. T3N, T3HN and T4 were not read.
Source: CDC Article 3, Division 3.2 Transect Zones, Sec. 3.2.70 T3 Edge (also 3.2.40 T2R, 3.2.50 T2RN)
Fence height limits and placement rules for Beaufort County, South Carolina.
On property line: Contact county
In transect zones, fences and walls may be up to 4 ft in front yards and corner side yards and 6 ft in side and rear yards, measured from natural grade. Exemptions include rural single-family lots in T1, T2 Rural and T2 Rural Low (text truncated). Permit rules were not read.
Source: CDC Division 5.4 Fences and Walls, Sec. 5.4.40 Height Requirements for Fences and Walls
Walk your land and see your boundaries drawn on the ground. See where setbacks apply. Searching any address is free.
Search Your Property FreeDisclaimer: This information is extracted from Beaufort County ordinances for reference only. Regulations vary by zoning district and may have changed. Contact the Beaufort County Planning Department for official guidance before building.
Ordinance text collected October 2026 from the county code. Code status: Not captured.
Get it on your phone — scan with your camera