Building setbacks, fence regulations, and zoning requirements for Fayette County.
Search Your Property FreeSetback requirements determine how far structures must be from property lines. The minimums below come from the Fayette County code for homes in unincorporated areas; your parcel's zoning district can change them.
Figures are for the R-20 district (R-40 is the same). Front setback is 40 ft on a minor thoroughfare and 60 ft on arterials and collectors. Across residential districts, front (minor road) runs 40-75 ft, side 10-50 ft and rear 30-75 ft; A-R is 75 ft front on a minor road, 50 side, 75 rear.
Fence height limits and placement rules for Fayette County, Georgia.
On property line: Contact county
Prohibited materials: barbed wire, electric fence
Front-yard walls and fences in A-R and residential districts need a zoning compliance certificate first. Up to 4 ft, listed materials; above 4 ft, the solid part stops at 4 ft and the rest must be at least 50% open. Barbed wire and electric fences are barred except for horse lots and A-R farming. None in the right-of-way. No side or rear height limit found.
Walk your land and see your boundaries drawn on the ground. See where setbacks apply. Searching any address is free.
Search Your Property FreeDisclaimer: This information is extracted from Fayette County ordinances for reference only. Regulations vary by zoning district and may have changed. Contact the Fayette County Planning Department for official guidance before building.
Ordinance text collected October 2026 from the county code. Code status: Codified through Ordinance No. 2026-03, enacted May 28, 2026 (Supp. No. 22); online content updated September 3, 2026.
Get it on your phone — scan with your camera