Building setbacks, fence regulations, and zoning requirements for Hendry County.
Setback requirements determine how far structures must be from property lines. These minimums apply to most residential construction in unincorporated Hendry County.
Setbacks specified for AOPD (Airport Overlay Protection District). A 10-foot strip along rear of lots and 5-foot strip along sides mentioned for easements in subdivision regulations.
Source: No building or roofed structure shall be located less than 40 feet from its front lot line, 15 feet from its side lot line, and 20 feet from its rear lot line. The lot line is determined to be the lease area of land within the non-secure area of the AOPD.
Fence height limits and placement rules for Hendry County, Florida.
On property line: No
Prohibited materials: wood, vinyl, barbed wire
Source: Fences and walls section - All fences and walls shall be constructed of concrete, masonry, or metal. Metal fences shall be of the open-weave, chain-link type. Fences and walls shall not exceed ten feet in height. Fences and walls shall not be located within any setback area on a street.
Walk your land and see the boundaries appear in AR. Know exactly where setbacks apply.
Get ParcelVisionDisclaimer: This information is extracted from Hendry County ordinances for reference only. Regulations vary by zoning district and may have changed. Contact the Hendry County Planning Department for official guidance before building.
Last updated: May 2026
ParcelVision