Building setbacks, fence regulations, and zoning requirements for Henry County.
Search Your Property FreeSetback requirements determine how far structures must be from property lines. The minimums below come from the Henry County code for homes in unincorporated areas; your parcel's zoning district can change them.
Front setback is 35 ft from street right-of-way (50+ ft wide) or 60 ft from centerline (narrower streets). Side yard requirements vary by district: A-1 and R-R districts require 15 ft minimum per side (30 ft total); Mixed Residential requires 7.5 ft per side (15 ft total). Rear yard is 50 ft for A-1/R-R districts, 25 ft for Mixed Residential. Manufactured homes require 25 ft side setback and 50 ft rear setback.
Source: Articles III, IV, and V (Sec. 21-307, 21-407, 21-507)
Tree removal regulations for Henry County, Virginia.
Permit required: No
Threshold: Trees within required setbacks, property boundaries, or within 20 ft of streams/lakes should be preserved unless removal necessary for access, utilities, or drainage. Deciduous trees (2-inch caliper minimum) required at 1 tree per 50 ft of street frontage in yards abutting public streets.
Source: Chapter 14 - Planning and Land Development
Walk your land and see your boundaries drawn on the ground. See where setbacks apply. Searching any address is free.
Search Your Property FreeDisclaimer: This information is extracted from Henry County ordinances for reference only. Regulations vary by zoning district and may have changed. Contact the Henry County Planning Department for official guidance before building.
Ordinance text retrieved May 2026 from the county code.
Get it on your phone — scan with your camera