Building setbacks, fence regulations, and zoning requirements for Howard County.
Search Your Property FreeSetback requirements determine how far structures must be from property lines. The minimums below come from the Howard County code for homes in unincorporated areas; your parcel's zoning district can change them.
Figures are for the R1 (Very Low Density Residential) district: front 25 ft on a collector or local street, 30 ft on an arterial; side 10 ft; rear 20 ft; accessory structures 5 ft from side and rear lines. RR: front 40 ft, rear 25 ft. AG: front 40 ft (50 ft arterial), side and rear 40 ft.
Source: Article 2, Sec. 2.12 R1 District Development Standards
Fence height limits and placement rules for Howard County, Indiana.
On property line: Yes
Prohibited materials: electrified wire, barbed wire, razor wire
In residential districts fences may be up to 4 ft in the front yard (no more than 50% opaque) and 6 ft in side and rear yards. Allowed up to the property line, but footers may not cross it; keep 1 ft from any public right-of-way. Finished side faces out. Vision clearance rules apply. No permit rule found.
Source: Article 5, Sec. 5.17 FW-02 Fence and Wall; Parks and Recreation and Residential
Walk your land and see your boundaries drawn on the ground. See where setbacks apply. Searching any address is free.
Search Your Property FreeDisclaimer: This information is extracted from Howard County ordinances for reference only. Regulations vary by zoning district and may have changed. Contact the Howard County Planning Department for official guidance before building.
Ordinance text collected October 2026 from the county code. Code status: Adopted February 1, 2010, effective June 1, 2010; no later amendments listed.
Get it on your phone — scan with your camera