Building setbacks, fence regulations, and zoning requirements for Madison County.
Search Your Property FreeSetback requirements determine how far structures must be from property lines. The minimums below come from the Madison County code for homes in unincorporated areas; your parcel's zoning district can change them.
Figures are for the R1 district: front 30 ft on a local road, 35 ft on a collector, 50 ft on an arterial; side 5 ft each, 20 ft total; rear 25 ft. CR (rural residential): front 30 ft on a local road, side 25 ft, rear 30 ft. Accessory structures of 400 sq ft or less may be 5 ft from side and rear lines; larger ones must meet district setbacks.
Source: Article 3, Sec. 3.8 R1 District Standards; Sec. 6.6 AS-01
Fence height limits and placement rules for Madison County, Indiana.
On property line: Yes
Prohibited materials: electrified (non-agricultural lots), barbed wire (non-agricultural lots), razor wire (non-agricultural lots), stockade (non-agricultural lots)
No permit needed. Fences may go up to any property line that is not a right-of-way line, and must stay 2 ft from rights-of-way and out of sight triangles and easements (unless the holder agrees). In residential districts: 3 ft in the front yard (the area between the street and the house) and 6 ft in side and rear yards.
Walk your land and see your boundaries drawn on the ground. See where setbacks apply. Searching any address is free.
Search Your Property FreeDisclaimer: This information is extracted from Madison County ordinances for reference only. Regulations vary by zoning district and may have changed. Contact the Madison County Planning Department for official guidance before building.
Ordinance text collected October 2026 from the county code. Code status: Not stated; Article 3 PDF file date 2018-12-28 (a draft update is posted, not adopted).
Get it on your phone — scan with your camera