Building setbacks, fence regulations, and zoning requirements for Marshall County.
Search Your Property FreeSetback requirements determine how far structures must be from property lines. The minimums below come from the Marshall County code for homes in unincorporated areas; your parcel's zoning district can change them.
Figures are for the T-1 Town Residential district; front is measured from the road right-of-way. Side yard is 10 ft or 10% of lot width, whichever is less, but at least 5 ft. A-3 Agricultural Residential: front 40 ft from a local road, rear 20, side 10. Agricultural districts also need a 30 ft buffer setback from all property lines; all districts 75 ft from a regulated drain.
Source: Article 3, Sec. 130 Table 3-B Distance Standards; Sec. 130.A Setback Requirements
Fence height limits and placement rules for Marshall County, Indiana.
On property line: Yes
Fences are allowed in required yards and up to the property line, finished side out. In T-1 front yard setbacks (and L-1 front and lakeside setbacks): max 3.5 ft and at least 75% open; side yard fences max 6 ft. Pools need a 5 ft fence with self-closing, latching gates. The amendment table records that fence permits were added (Article 11, not read).
Walk your land and see your boundaries drawn on the ground. See where setbacks apply. Searching any address is free.
Search Your Property FreeDisclaimer: This information is extracted from Marshall County ordinances for reference only. Regulations vary by zoning district and may have changed. Contact the Marshall County Planning Department for official guidance before building.
Ordinance text collected October 2026 from the county code. Code status: Effective April 11, 2023 (amendments through 02/20/23).
Get it on your phone — scan with your camera