Building setbacks, fence regulations, and zoning requirements for Pickens County.
Search Your Property FreeSetback requirements determine how far structures must be from property lines. The minimums below come from the Pickens County code for homes in unincorporated areas; your parcel's zoning district can change them.
Pickens County has no zoning districts; these setbacks apply county-wide to residential buildings, measured from the property line on any street type. Accessory buildings up to 1,000 sq ft: 5 ft from any line (larger ones use house setbacks). Other accessory structures: 20 ft from a street right-of-way. Lakes Hartwell, Keowee and Jocassee: 50 ft from full pool.
Fence height limits and placement rules for Pickens County, South Carolina.
On property line: Yes
No minimum setback for fences or freestanding walls, but none may be placed in a street right-of-way or public access easement or block visibility at intersections. No fence height limit or permit rule found.
Source: UDSO Article 4, Sec. 409(b)(1) Fences and Free-Standing Walls
Tree removal regulations for Pickens County, South Carolina.
Permit required: Contact county
Threshold: 6 in caliper at 4 ft (lakeshore setback only)
Only within the 50 ft setback on Lakes Hartwell, Keowee and Jocassee: no tree larger than 6 in caliper (measured 4 ft up) may be removed unless a registered forester certifies it a hazard; trees may be limbed up to half their height. No other county-wide tree rule found.
Walk your land and see your boundaries drawn on the ground. See where setbacks apply. Searching any address is free.
Search Your Property FreeDisclaimer: This information is extracted from Pickens County ordinances for reference only. Regulations vary by zoning district and may have changed. Contact the Pickens County Planning Department for official guidance before building.
Ordinance text collected October 2026 from the county code. Code status: Article 4 amended 9/19/16, 2/4/19, 4/1/24; Article 8 revised about April 2026.
Get it on your phone — scan with your camera