Building setbacks, fence regulations, and zoning requirements for Sullivan County.
Search Your Property FreeSetback requirements determine how far structures must be from property lines. The minimums below come from the Sullivan County code for homes in unincorporated areas; your parcel's zoning district can change them.
Figures are for the R-1 district; corner lots need 30 ft on the second street. Accessory structures in the rear yard must be at least 8 ft from side and rear lines; in a side yard they meet house setbacks. A-1 and AR: 30/12/30 ft. A-5/A-2: 30/30/30 ft. R-2: 30/10/20 ft. Setbacks do not apply to agricultural buildings.
Source: Article III, Sec. 3-103, Table 3-103B Bulk Regulations for Agricultural and Residential Districts
Fence height limits and placement rules for Sullivan County, Tennessee.
On property line: Contact county
Privacy walls or fences up to 8 ft high (from finished grade, not roofed) are allowed in required yards (amended 9/15/2022). Corner lots: nothing that blocks vision between 3 and 10 ft above street grade within the 35 ft sight triangle. Permit requirement not stated in the text read.
Walk your land and see your boundaries drawn on the ground. See where setbacks apply. Searching any address is free.
Search Your Property FreeDisclaimer: This information is extracted from Sullivan County ordinances for reference only. Regulations vary by zoning district and may have changed. Contact the Sullivan County Planning Department for official guidance before building.
Ordinance text collected October 2026 from the county code. Code status: Effective January 1, 2004; PDF dated 12/19/24 with amendments through 03/14/2024.
Get it on your phone — scan with your camera