Building setbacks, fence regulations, and zoning requirements for Walworth County.
Search Your Property FreeSetback requirements determine how far structures must be from property lines. The minimums below come from the Walworth County code for homes in unincorporated areas; your parcel's zoning district can change them.
Setbacks vary significantly by zoning district (A-1, A-2, C-1, C-2, R-1 through R-8, B-1 through B-4). Front yard setbacks range from 15-300 ft depending on road type (subdivision roads: 15-40 ft, town roads: 50-200 ft, county roads: 65-250 ft, state/federal highways: 85-300 ft). Side yards: 10-75 ft. Rear yards: 10-100 ft. Shore setbacks: absolute minimum 75 ft from ordinary high water mark. Accessory structures ≤1,650 sq ft must be ≥3 ft from lot lines in rear yard. Structures >1,650 sq ft must maintain principal structure setbacks.
Source: Chapter 74, Division 3 - Zoning Districts, Sections 74-51, 74-52
Fence height limits and placement rules for Walworth County, Wisconsin.
On property line: No
Source: General provisions - Screening fences
Walk your land and see your boundaries drawn on the ground. See where setbacks apply. Searching any address is free.
Search Your Property FreeDisclaimer: This information is extracted from Walworth County ordinances for reference only. Regulations vary by zoning district and may have changed. Contact the Walworth County Planning Department for official guidance before building.
Ordinance text retrieved May 2026 from the county code.
Get it on your phone — scan with your camera