Building setbacks, fence regulations, and zoning requirements for Jasper County.
Search Your Property FreeSetback requirements determine how far structures must be from property lines. The minimums below come from the Jasper County code for homes in unincorporated areas; your parcel's zoning district can change them.
Figures are for the R1 district (32,000 sq ft with sewer, 1 acre without); the same side and rear setbacks apply to accessory structures. R2: 30/10/20. A1: front 70 ft, side 30 ft, rear 35 ft; A2: front 70, side 12, rear 35.
Fence height limits and placement rules for Jasper County, Indiana.
On property line: Yes
Prohibited materials: barbed wire, electrified wire, razor wire, glass
No permit is needed for a fence or wall. Fences may go up to the property line, not in an easement without the holder's permission; vision clearance rules apply. In R1 and R2: max 4 ft in front or side yards (wood, composite, stone, masonry or decorative metal) and 8 ft in rear yards (vinyl or coated chain link also allowed). Covenants may be stricter.
Source: Ch. 20.50: 20.50.260 FW-01 General; 20.50.290 FW-04 Residential
Walk your land and see your boundaries drawn on the ground. See where setbacks apply. Searching any address is free.
Search Your Property FreeDisclaimer: This information is extracted from Jasper County ordinances for reference only. Regulations vary by zoning district and may have changed. Contact the Jasper County Planning Department for official guidance before building.
Ordinance text collected October 2026 from the county code. Code status: Current through Ordinance 12-01-25B, passed December 1, 2025.
Get it on your phone — scan with your camera